Setup Guide

  • Step 1

    Step 1 - Unpack your bin

    Verify the equipment list.

    Please document missing equipment via email.

  • Step 2

    Step 2 - Open the transmitter case

    Each case contains a transmitter, power supply, RCA to headphone jack cable and RCA to RCA cable.

  • Person plugging a black power adapter into a white power strip

    Step 3 - Plug the power supply into a power outlet

  • Close-up of a person connecting a power cable to a device with audio input and a switch.

    Step 4 - Plug the power supply into transmitter

  • Close-up of a black audio device with DC12V power input, audio input jacks, and on/off switch. A hand is operating the switch.

    Step 5 - Power on the transmitter

    High - (Outdoors)

    Low - (Indoors)

  • Close-up of an audio device with power and audio input connections. A hand is adjusting a dial or switch on the device. The device has DC12V power input and red and white RCA audio input cables.

    Step 6 - Plug in the audio input cable

    iPhone/iPod/Phone - RCA to headphone cable

    DJ/Audio Mixer - RCA to RCA

  • Image showing a smartphone connected via a cable on the left side, labeled 'Smartphone,' and a computer connected with a cable on the right side, labeled 'Computer.'

    Step 7 - Plug the input cable into a audio source

  • Close-up of a finger adjusting the channel on a device with a digital display showing the number 2.

    Step 8 - Select a channel on the transmitter

  • Close-up of a person holding headphones with an on/off switch visible between the ear cups.

    Step 9 - Power on the headphones

  • Hands holding black over-ear wireless headphones with visible controls, labeled 'CHANNELS' on a light background.

    Step 10 - Select a channel

  • Stack of three wireless headphones with LED lights in blue, red, and green, labeled with corresponding numbers and colors on the left.

    Step 11 - Channels

  • Close-up of hands adjusting the volume control on black headphones with instructions: "Roll down to turn volume up."

    Step 12 - Volume Controls

  • A person standing behind three electronic devices with antennas on a white background.

    Step 13 - Verify transmitter channel & placement

    Must be placed 3 - 4ft above ground.

    Must be spaced 8-10 inches apart from other transmitters.

    Must be on separate channel from other transmitters. (1, 2, or 3)

  • Image showing a smartphone on a table with a hand touching the screen to adjust the volume. Checklist to the left indicates steps such as audio source connected, low volume, put headphones on, choose channel, headphones to max, raise volume.

    Step 14 - Sound Check

    Raise headphone volume to max.

    Slowly raise volume from source until desired level is reached.

    50 - 75% from the source is the sweet spot.

  • Stack of black headphones with "Enjoy the Party" text overlay.

    Step 15 - All Done! Yay!